Mediums
TALENS GESSO PRIMER 1001Purpose:Production of a universal preparation layer on variousabsorbing subsoilsComposition: Acrylic resin dispersion, titanium dioxideEnsures good adhesion, including oil, acrylic and poster colorSuitable for absorbent dust- and grease-free substrates such as malt, wood,Multiplex, hardboard, cardboard and paperSuitable as a preparation for brickwork on alkaline and non-alkalineSubfloors like fresh concrete, stucco and brickStrongly absorbent substrates must first be treated with Amsterdam acrylic binderCan be dyed with acrylic paintCan be thinned with waterDrys within a few hours, after 24 hours can be painted over with oil paintStore above 10 ° C, keep frost-freeClean the material with waterAvailable in 1000 ml, 5 l and 10 l.
Easel painting board with clamp legs and handle 50x62cm Practical product easy to transportEasy to use Weight approx. 4 kg
Kluthe Lösin® 400 Nitro-Universal-Verdünner ist ein hochwertiges Lösungsmittel. Die damit verdünnten Lacke zeigen nach der Trocknung hervorragenden Glanz und Verlauf. Der Verdünner besitzt eine sehr hohe Lösekraft und ist daher sparsam im Verbrauch. Zum Verdünnen von: Nitro-, Nitro-Kombinations-, Chlorkautschuk-, lufttrocknenden und einbrennbaren Kunstharz-Lacken, Zwei-Komponenten Lacken auf Basis Epikote sowie luft- und ofentrocknenden Zapon-Lacken. Zum Reinigen von: Spritzpistolen, Streichgefäßen, usw. Zum Entfernen von: Schmutz-, Fett- und Farbflecken auf Holz und Steinböden, Glas, Polstern, Teppichen, usw. Zum Kleben von: Kunststoff-Baukästen (Polystyrol und Acrylglas).
Product information "Kluthe disinfectant Haku Pur 50-525" Disinfection for surfaces For light soiling. Suitable for furniture, doors, glass surfaces and sanitary facilities. Ready to use and fragrant. • extremely effective • suitable for many surfaces • cleans and disinfects at the same time • for home, office and catering • in a handy 1 liter bottle and efficient 5 liter canister
All varnishes increase the chemical and physical resistance, and protect against ultraviolet light. The varnishes improve the colour intensity and increase the durability of the painting. Ensure that the surface to be treated is clean and apply using a suitable varnish brush. The varnishes contain a petroleum distillate. Do not dilute the varnishes, or mix with water. UV Resistant varnish gloss a glossy removable painting varnish on a basis of cyclohexanol UV Resistant varnish satin a satin removable painting varnish on a basis of cyclohexanol UV Resistant varnish matt a matt removable painting varnish on a basis of cyclohexanol.
Content: 0.1 Piece (€304.90 / 1 Piece)
Acrylic medium gloss a glossy medium without thickener for increasing the fluidity of the acrylic paint. can be mixed with New Masters Classic Acrylics in any desired quantity. dries as a durable transparent film Acrylic medium satin a satin medium without thickener for increasing the fluidity of the acrylic paint. can be mixed with New Masters Classic Acrylics in any desired quantity. dries as a durable satin film Acrylic medium matt a matt medium without thickener for increasing the fluidity of the acrylic paint. can be mixed with New Masters Classic Acrylics in any desired quantity. dries as a durable matt film
Content: 0.1 Piece (€250.00 / 1 Piece)
Product information "Michael Harding Beeswax Paste PM4 100ml" MICHAEL HARDING Beeswax Paste PM4 thickens and increases the volume of oil paint and creates a deep matt surface. 100ml
Product information "Permaset Aqua Mediums" Permaset Aqua Media PERMASET TABLE GLUE is a specially formulated pressure sensitive adhesive for fabric printing. Table Glue prevents any movement of the fabric during printing and is easily applied with a brush roller or spray. Table Glue dries quickly and provides a permanently adhesive surface suitable for use on almost any surface. SYNTHETIC FIXER An additive for Permaset printing pastes or fabric printing inks that significantly improves adhesion to substrates that would have poor adhesive properties under normal conditions. Synthetic Fixer is best suited for applications on synthetic materials such as poly/cotton blends, polyester or acrylic fibers. THICKENER is, as the name suggests, a thickener for Permaset printing pastes or fabric printing inks. By adding Permaset Tinters, water, ammonia sulfate solution, synthetic fixer or cold cure additive, the viscosity of the printing medium is reduced. A small addition of Permaset Thickener will return the print media to its original viscosity. PERMASET ANTI-BLEED ADDITIVE is another specialty product designed for applications where print “bleeding” or “hazing” is a concern. Many fabrics are pre-treated by fabric manufacturers either as part of the manufacturing process or to give the finished product a special quality. Unfortunately, this pre-treatment reacts unfavorably with the print media and results in prints that bleed or haze. Adding a small amount of Anti-Bleed Additive will give the print a firmer and more solid definition. PERMASET FABRIC SOFTENER is an additive used when a softer feel to the finished print is desired. Some fabrics require a softer print due to their delicate nature and so fabric softener is the perfect way to achieve a “softer feel.” Fabric softener can also be used in conjunction with the use of Permaset Synthetic Fixer and/or Permaset Cold Cure Additive, as these additives tend to stiffen the feel of a print.PERMASET PRINT RETARDER is designed to slow down the drying process of the Permaset product. This has the benefit of delaying the drying of the Permaset product on the screen, thus preventing screen clogging. Print retarders are also beneficial for printing, as they allow for easier separation of the screen from the print during the printing process.
Content: 0.5 Piece (€74.40 / 1 Piece)
Heavy gel medium gloss A glossy gel with a thicker viscosity than that of the New Masters Classic Acrylics.Heavy gel medium satin A satin gel with a thicker viscosity than New Masters Classic AcrylicsHeavy gel medium matt A dull gel with a thicker viscosity than New Masters Classic Acrylics.
Content: 0.1 Piece (€260.00 / 1 Piece)
Product information "Kluthe hand disinfectant Haku Tex 12"Haku®Tex 12 Biocidal product for hand disinfection according to WHO recipe Composition: 100 g solution contains: Active ingredients: Propan-2-ol 70.1 g. Other ingredients: Glycerol, hydrogen peroxide, purified water. Free of nanomaterials.Areas of application: For hygienic disinfection of hands. Dosage instructions, type and duration of use: Rub at least 3 ml undiluted into dry hands for 30 seconds without rinsing Contraindications: Not suitable for disinfecting mucous membranes. Do not use in the immediate vicinity of the eyes or open wounds. Hypersensitivity (allergy) to one of the ingredients. Side effects: Slight dryness or irritation of the skin can occasionally occur. In such cases, it is recommended to intensify general skin care. Allergic reactions are rare. Warnings: Should not be used on newborns. Only use electrical devices after drying. Do not bring into contact with open flames. Do not use near sources of ignition. Flash point 19 °C, flammable. If used as intended, there is no risk of fire or explosion. Measures after spillage: Immediately absorb the liquid, dilute with plenty of water, ventilate the room and remove sources of ignition. Do not smoke. In the event of fire, extinguish with water, extinguishing powder, foam or CO2. First aid measures: In case of eye contact, rinse eyes with running water with eyelids open for several minutes, then consult an ophthalmologist immediately. If swallowed, rinse mouth with plenty of water and get medical help immediately. Do not induce vomiting. Make the patient drink plenty of water in small sips. Disposal instructions: Dispose of contents/container to an approved waste disposal company or municipal collection point. Do not pour into the sewage system. Approval number: General order of the BfC dated March 20, 2020 Use biocidal products carefully. Always read the label and product information before use.
High build gel medium gloss A glossy gel for the impaasto grinding technique: it gets a paint with a heavy structure. This "High Build Gel" is half covering.High Build gel medium satin A satin gel for impasto grinding technology, it gives me a paint paint a heavy structure This high build gel is half coveringHigh build gel medium matt A matt gel for impasto grinding technology: a paint with a heavy structure is obtained This high build gel is half covering.
Content: 0.1 Piece (€275.00 / 1 Piece)
Product information "Michael Harding Resin-Oil Wax Medium PM3 100ml" MICHAEL HARDING Resin-Oil Wax Medium PM3 is a soft paste for oil painting, made from bleached, pure beeswax and fused with dammar resin and linseed oil (stand oil). 100ml
Product information "Michael Harding Oleo-Resin Medium PM5" MICHAEL HARDING Oleo-Resin Medium PM5 increases the shine and depth of oil paint. 100ml