Product information "Lukas Medium 5 Painting Butter #2225" Medium 5 ("Painting Butter") Slightly yellowish painting medium for mixing quick-drying, highly elastic, pasty alkyd resin oil paint; dries like "pure" oil paint and is resistant to turpentine oil; keep tightly closed. Note: If stored in the dark for a long time, the paint may turn yellow, especially in white areas - this is reversible in the light, however!
Methoxypropanol PM
propylene glycol dimethylether
Form liquid
Solubility in water completely miscible
Boiling point 119 - 122°C
Safety Information
GHS02-1: Flame
GHS07: Exclamation mark
Signal word: Warning
Hazard designation
H226: Flammable liquid and vapour.
H336: May cause drowsiness or dizziness.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P370+P378: In case of fire: Use sand, dry extinguishing powder or foam for extinction.
P403+P235: Store in a well ventilated place. Keep cool.
Product information "Lösin 600 Kluthe odorless" Kluthe thinner for aromatic-free paints Lösin 600 thinner aromatic-free High-quality, methanol and aromatic-free thinner for aromatic-free synthetic resin paints. Properties: For aromatic-free synthetic resin paints Promotes flow Low odor Application: Suitable for thinning aromatic-free synthetic resin paints.
The thinner promotes flow and prevents the paint from turning white or becoming dull, even in extremely high humidity.
Product information "Vallejo Pearl Medium .158 500ml"An acrylic medium formulated with mica that can be mixed with acrylic paints to create an iridescent sheen or applied alone to create a silvery iridescent effect. UV resistant.
Pine Turpentine
essence, double rectified, DAB 9
Chemical description Turpentine Oil
Inflammation point ca. 220°C
Form liquid
Solubility in water practically insoluble
Boiling point 154 - 170°C
Safety Information
GHS02: Flame
GHS08-2: Health Hazard
GHS09: Environment
Signal word: Danger
Hazard designation
EUH208: May produce an allergic reaction.
H226: Flammable liquid and vapour.
H302: Harmful if swallowed.
H304: May be fatal if swallowed and enters airways.
H312: Harmful in contact with skin.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H332: Harmful if inhaled.
H411: Toxic to aquatic life with long lasting effects.
Safety Information
P260c: Do not breathe vapours.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P301+P310: If swallowed: Immediately call a poison center or physician.
P302+P352: If on skin: Wash with soap and water.
P331: Do not induce vomiting.
P333+P313: If skin irritation or rash occurs: Get medical attention.
P501: Dispose of contents/ container according to regional, national and international regulations.
Product information "Kluthe Balsam Turpentin-Oil"Real, pure balsam turpentine oil of the highest quality, also available as a product in stores. Solvent Cleaning agent Stain remover - stain remover for sanding rubber Fly remover - rim cleaner Furniture and wood cleaner - wood care product Leather cleaner - for leather care Stain remover / stain remover Stain remover for oil and grease stains Bleaching agent Degreaser and cleaning agent in the trade e.g. wood processing / renovation For glass processing To repel mosquitoes As an attractant when fishing For oil painting For drying As a scented oil One of the highest quality, most effective and strongest solvents on a natural basis with a fresh, essential scent, special feature Turpentine oil Balsamic oil is characterized by its slow evaporation - hence a very wide range of applications. Balsamic turpentine oil has been used for centuries to thin oil paints and dissolve resins. In addition to its high dissolving power, balsam turpentine has many advantages. In contrast to petroleum-based solvents (petroleum distillates), it evaporates more slowly, so that varnishes or oil paints have enough time to penetrate the wood.
Product information "Kluthe Turpentine Substitute"
Kluthe Lösin® Turpentine Substitute Kluthe Lösin® Turpentine substitute is a high-quality cleaning and thinning agent. Synthetic resin and oil paints can be thinned and work equipment, wood and linoleum floors can be cleaned. This agent must not be used as fuel or heating fuel! Properties of Kluthe Lösin® Turpentine Substitute Kluthe Lösin® Turpentine Substitute is characterized by the following properties: Cleaning agent for work equipment Thinner for oil and synthetic resin paints High quality Slow evaporation Tax-privileged mineral oil Colorless Liquid
Methoxypropanol PM
propylene glycol dimethylether
Form liquid
Solubility in water completely miscible
Boiling point 119 - 122°C
Safety Information
GHS02-1: Flame
GHS07: Exclamation mark
Signal word: Warning
Hazard designation
H226: Flammable liquid and vapour.
H336: May cause drowsiness or dizziness.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P370+P378: In case of fire: Use sand, dry extinguishing powder or foam for extinction.
P403+P235: Store in a well ventilated place. Keep cool.
€10.80*
CLP-/REACH-Notice
Symbol
Hazard Statements
H226: Flammable liquid and vapour.
H336: May cause drowsiness or dizziness.
Precautionary statements
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P312: Call a POISON CENTRE/doctor/ if you feel unwell.
P370 + P378: In case of fire: Use to extinguish.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
P403 + P235: Store in a well-ventilated place. Keep cool.
Linseed Oil, cold-pressed
pale yellow, contains some mucilage
For oil paints, tempera, wood treatment.
Chemical description Natural linseed oil
Form liquid
Solubility in water insoluble
Handling and Warnings
CAUTION: Materials impregnated with oil may spontaneously combust (auto-oxidation). Burn rags under supervision or dry outspread.
Calcium Carbonate
Order number: 58490
natural, approx. 1 µ, very white
Chemical description Calciumcarbonat
ColorIndex PW 18.77220
Suitability Acrylics, Lime / Fresco, Oil, Tempera, Watercolor / Gouache
Color White
Form powder
Solubility in water 8 mg/l
Highly elastic acrylic emulsion, which adheres on all common grounds and dries with water. After drying, it can be treated with the usual abrasives. Environmentally friendly.
Dispersion based on methyl methacrylate and butyl acrylate.Produces a tough elastic film and is extremely tensile resistant. Suitable for wet and dry applications. Standard type for doublings and marouflage. Water-dilutable. Film after drying water resistant. Permanently soluble in acetone, alcohol, toluene, xylene, etc.
Bronze medium
for bronze effects
50032
Ready-to-use binder for Schmincke Oil bronzes. For brilliant metallic effects on oil paintings and several other surfaces like wood, metal or gypsum. The gilding remains after drying soluble to turpentine respectively turpentine substitute. (Pre-tests are recommended prior to the application of varnish!)
Thinner: Turpentine substitute (50019)
Handling
Shake well before use.
Mix 3 parts Schmincke oil-bronze and 2 parts bronze medium with a painting knife shortly before application.
The product is ready to use. The mixture can be diluted with e.g. turpentine substitute 50019.
Dries wipe and water-resistant. Colour layer remains soluble to oil of turpentine 50024 / 50102 and turpentine substitute 50019 after getting dry.
Please clean tools like brushes or palettes as soon as possible with e.g. oil of turpentine 50024 / 50102, turpentine substitute 50019 or brush cleaner 50051 / 50052.
When used on absorbent surfaces, we recommend an additional pre-treatment with bronze medium thinned with turpentine substitute 50019.
Can be varnished carefully when dried completely with Universal varnish AEROSPRAY glossy 50590 (oil paintings should dry at least 8 – 12 months before varnishing; pre-tests are required cause the painting layer remains soluble in oil of turpentine / turpentine substitute.)
Only suitable for indoor objects (not for damp rooms!).
Close immediately after use.
Store in a cool and dry place.
Individual pre-tests are required.
Sizes: 60 ml and 200 ml
Contains: cumarone resin, mineral spirit.
Hazard statements
Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Safety precautions
Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing and eye/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Store in a well-ventilated place. Keep container tightly closed.
Other hazardsRepeated exposure may cause skin dryness or cracking.
Ethyl Alcohol
anhydrous, denatured
ATTENTION: Ethyl Alcohol can only be shipped in 1 liter containers with normal shipping methods. Also the shipment of further 1 liter containers is without difficulty. The shipment of 3 liter and 200 liter containers is only possible by a forwarder!
Chemical description Ethanol dehydrated, denatured with 1% MEK
Form liquid
Solubility in water miscible
Boiling point 78°C
Safety Information
GHS02-1: Flame
GHS07: Exclamation mark
Signal word: Warning
Hazard designation
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses and continue rinsing.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P403+P235: Store in a well ventilated place. Keep cool.
P501: Dispose of contents/ container according to regional, national and international regulations.
€13.60*
CLP-/REACH-Notice
Hazard Statements
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
Precautionary statements
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313: If eye irritation persists: Get medical advice/attention.
P370 + P378: In case of fire: Use to extinguish.
P403 + P235: Store in a well-ventilated place. Keep cool.
Kluthe Special Gasoline Lösol 80, 1lKluthe Special Gasoline Lösol 80 is a highly effective solvent used for cleaning and degreasing machinery, equipment, and workpieces. With a 1-liter capacity, this product is ideal for industrial applications, as well as workshops and households. Lösol 80 efficiently removes oils, grease, tar, resins, and other stubborn contaminants without damaging the surfaces. It evaporates quickly and leaves no residue. Perfect for metals, plastics, rubber parts, and many other materials.Features:Removes oils, grease, tar, resins, and other contaminantsSuitable for various materialsQuick evaporation and residue-free application1l bottleApplication:
Apply the special gasoline to the surfaces to be cleaned and let it work briefly. Remove the contaminants with a cloth or sponge. For stubborn stains, a repeat application may be necessary.
€7.30*
CLP-/REACH-Notice
Symbol
Signalword
Danger!
Hazard Statements
H225: Highly flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271: Use only outdoors or in a well-ventilated area.
P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor/.
Product information "Kremer Acetone (70700) 1 L"Acetone
is a colorless, aromatic-smelling, flammable liquid. Acetone can be mixed with water, alcohol and ether. Acetone dissolves fats, resins, shellac, vinyl resins, asphalt, acetylcellulose, nitrocellulose, acetylene. Acetone is the simplest ketone.Use:As a solvent, extraction and crystallization agent, for example in paint strippers for oil and lacquer paints,
solvent for acetyl cellulose in lacquer and acetate silk dyeing, solvent for acetylene, for
adhesive production, as an alcohol substitute in the dewatering of microscopic preparations, in the synthesis of
diacetone alcohol, methyl isobutyl ketone, bromoacetone, chloroform, iodoform, sulfonal, etc., for dissolving essential
oils, balsams, chlorophyll, gums, resins, etc. ATTENTION: Acetone may only be sent via normal shipping in 1 liter containers! It is also no problem to send several 1 liter containers in one shipment. liquid miscible boiling point at 55.8 - 56.6°C Chemical formula: C5H8O2
€6.79*
CLP-/REACH-Notice
Symbol
Signalword
Attention!
Danger!
Hazard Statements
EUH066: Repeated exposure may cause skin dryness or cracking.
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
Precautionary statements
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312: Call a POISON CENTRE/doctor/ if you feel unwell.
P370 + P378: In case of fire: Use to extinguish.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
P403 + P235: Store in a well-ventilated place. Keep cool.
Shellsol® D 40
Order number: 70471
aroma-free
Boiling point: 145 - 205°C; Not suitable for medical purposes!
Chemical description Mixture of paraffinic and naphthenic hydrocarbons C9-C11.
Form liquid
Solubility in water 0.04 g/l; not miscible
Boiling point 130 - 213°C
Safety Information
GHS02: Flame
GHS08-2: Health Hazard
GHS09: Environment
Signal word: Danger
Hazard designation
EUH066: Repeated exposure may cause skin dryness or cracking.
H226: Flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Safety Information
P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P273: Avoid release to the environment.
P280: Wear protective gloves/ clothing/ eye/ face protection.
P301+P310: If swallowed: Immediately call a poison center or physician.
P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P331: Do not induce vomiting.
P403+P235: Store in a well ventilated place. Keep cool.
Blanc Fixe
Order number: 58700
barite, barium sulfate, powder
For heavy opaque colors, lowers oil absorption.
ColorIndex PW 21.77120
Opacity semi-opaque
Suitability Acrylics, Ceramic, Oil, Tempera, Watercolor / Gouache, Silicate binder, Waterglas
Color White
Form powder
Solubility in water insoluble
Chemical Formula Ba(SO4)
Modern Egg Tempera (Replacement) Medium No. 6
Brownish water-mixable binder for making classical tempera colours (egg yolk
replacement). Addition produces a stable mixture of oil and water colours.
For more details please request a product information sheet at www.lukas.eu or
by phone on ++49 (0) 2 11-78 13-0
alkyd resin, emulsifying agents, balsam turpentine, water, additives
water (turpentine) / dangerous goods /
CompositionMixture of water and propanediol with acrylic polymerProperties- higher viscosity version of the Retarder whichadded to acrylics extends drying for a very longtime, up to three times as long as the regularRetarder- will change the viscosity of Lascaux Artist Acrylicsonly slightly- adding Lascaux Retarder extends the relativelyshort drying time of acrylic colours on nonporoussupports and keeps paint film open longer: up to acouple of hours- reduces the evaporation rate of the water andenhances the reemulsifying capacity of the paint,i.e. dry paint film containing- the addition of Lascaux Ultra Retarder does notalter the hue of the colourApplications, Directions and NotesSame as Lascaux Retarder.Physiologically and toxicologically safe in conventionalusage. USA: conforms to ASTM D-4236.Sizesbottles of 85 ml, 250 ml and 1 l, plastic buckets of 5 l.
Lascaux thickener increases the consistency of the ink at high dilutions with water. The good strokes are thus retained. The thickening effect is only ensured in the wet state.increases the viscosity of acrylic paints saves the water content of the colors and thereby extends the opening timeallows a good brushing in the case of very dilute colors when applying glazes and prevents drips The color depth and surface texture of the painting remain unchanged.
Content:
0.25 Piece
(€58.40* / 1 Piece)
€14.60*
CLP-/REACH-Notice
Symbol
Signalword
Danger!
Hazard Statements
EUH208: Contains . May produce an allergic reaction.
Liquid Mask
Used to reserve areas which are to remain unpainted, especially in airbrush techniques, but also with watercolours and temperas. Liquid Mask forms a protective film on the area which the artists does not want to paint. Once the work is dry, liquid mask is rubbed off with an eraser or piece of cloth, revealing unpainted area.
Product information "DANIEL SMITH Watercolor Masking Fluid 30ml" Our watercolor masking fluid is easy to apply using the bottle applicator, the included 5 fine tip applicator tips or with an inexpensive paint brush. Masking Fluid creates an impenetrable barrier to protect your watercolor paper and preserve the white areas by preventing watercolor paints from flowing into areas you don't want, leaving sharp, clean edges. Our masking fluid is cream in color and dries to a transparent caramel color so you can see it as you work and yet it is unobtrusive when working on your painting. Once the masking fluid has dried, it is easy to remove with a rubber cement pickup or even your clean fingers. However, be careful not to leave any oils from your fingers behind when rubbing the dried masking fluid. Oils from your fingers can interfere with reapplying watercolor paints. Once the masking fluid has been removed, either leave the white areas white or apply fresh watercolor over the white area you have retained to maintain maximum watercolor vibrancy. Tips for using DANIEL SMITH
Watercolor Masking Fluid: Do not shake the masking fluid or you will create air bubbles that will enter the applicator tip and transfer the bubbles into your masking fluid line.
DANIEL SMITH Masking Fluid does not need to be shaken as our latex mix does not separate easily. If you feel like something needs mixing, gently roll the bottle across the table once or twice. I like to keep my Masking Fluid upside down in a small jar when I am working with the Masking Fluid in between actual application. This way, any bubbles that may be present will stay at the top (which are now at the bottom since the bottle is upside down) and will not get into the applicator needles. When applying, gently squeeze the bottle to allow the masking fluid to flow out of the applicator tip. Stop squeezing once you get a "bead" of masking fluid. Begin applying masking fluid to your watercolor paper and allow capillary action to draw out the masking fluid as you move the applicator bottle across the paper. You may need to give the occasional light squeeze if capillary flow is interrupted. Keep the bottle upside down to allow capillary action to continue flowing once it has started. (another reason it's good to store the bottle upside down in a jar when not actually applying) Be sure to rinse the applicator tip thoroughly immediately after use to avoid clogging as it dries. A good tip for rinsing the applicator tip once you have a second bottle of masking fluid: keep the empty bottle, rinse it out and fill it with clean water, then put the applicator tip you just used on the bottle applicator and rinse out the liquid masking fluid by squeezing the bottle. If some masking fluid dries on the applicator, you can usually peel it off. If the inside of the applicator is dry, try using a fine needle to loosen and remove it, although most needles are not fine enough to be inserted into the uncut applicator tips. You can also use a paintbrush instead of the 5 tips that come with the masking fluid. Do not use your good paintbrushes, as all brushes will clog with dried masking fluid over time. Immediately rinse the brush thoroughly with water. Allow the masking fluid to dry thoroughly before painting with watercolors. Make sure your watercolor paint is dry before removing masking fluid. To remove masking fluid, use a Rubber Cement Pick-up rather than your fingers to avoid dirtying your watercolor paper or getting oil from your fingers on the watercolor paper. Replace the storage cap when you are finished with the masking fluid.
Lascaux Matting AgentCompositionDispersed pyrogenic silicia with acrylic polymer inwaterProperties- used to obtain a matt effect with acrylic paintsand mediums. It contains no binders.- dries to a matt, water-resoluble film- lightfast and age resistandApplications- adding Lascaux Matting Agent gives acrylics a mattappearance similar to that of gouache or temperacolours- likewise, acrylic colours can be prepared forsupplementing or retouching lime and caseinpaintings at any stage- the Matting Agent is only suitable for use withwater-based systems and for interior applicationsDirectionsSlowly add 20-30% Matting Agent to the relevantproducts, stirring all the time. Depending on theamount of the agent added, a certain loss of transparencyis unavoidable. Higher proportions of MattingAgent will proportionaly reduce the binder contentthereby diminishing the waterproofness and scratchresistance of the paint. The Matting Agent shouldtherefore only be used for interior work.NotesPhysiologically and toxicologically safe in conventionalusage. USA: conforms to ASTM D-4236.Sizesbottles of 85 ml, 250 ml and 1 l, plastic buckets of 5 l.
Content:
0.25 Piece
(€58.36* / 1 Piece)
€14.59*
CLP-/REACH-Notice
Hazard Statements
EUH208: Contains . May produce an allergic reaction.
We use cookies We may place these to analyze our visitor data, improve our website, show personalized content, and provide you with a great website experience. For more information about the cookies we use, open settings.More information...